View source for Wifi setup on the raspberry pi - easy method with WPA

If you just got a Raspberry Pi, here is how to setup the wifi (as long as your hardware is detected!) using command line on Raspbian Wheezy 7 (debian 7 for ARM).

==Steps==
#Install Raspbian on the pi
#Boot to command line
#Run Command
##sudo nano /etc/network/interfaces
#Replace content with content below
 auto lo
  
 iface lo inet loopback
 iface eth0 inet dhcp
  
 allow-hotplug wlan0
 auto wlan0
  
 iface wlan0 inet dhcp
        wpa-ssid "ssid"
        wpa-psk "password"

When you are done, press Ctrl + X, then Y to save before quitting. Reboot the pi, and you should be connected with an IP.

==External Links==
*[http://learn.adafruit.com/adafruits-raspberry-pi-lesson-3-network-setup/setting-up-wifi-with-occidentalis Adafruit - Raspberry Pi Wifi Setup]
[[Category:Raspberry Pi]]